0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Yielding and Ultimate Deformations of Wide and Deep Reinforced Concrete Beams

Auteur(s): ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 11, v. 12
Page(s): 2015
DOI: 10.3390/buildings12112015
Abstrait:

Current formulations proposed by Eurocode 8 part 3 for the inelastic deformations of existing reinforced concrete members are assessed separately for wide beams (WB) and conventional deep beams (DB). The current approach, based on a large experimental database of members, predicts larger ultimate chord rotation but lower chord rotation ductility for WB rather than for DB despite the similar curvature ductility, due to lower plastic hinge lengths in WB. However, if the data are disaggregated into DB and WB, predicted chord rotations are consistently conservative for DB and not conservative for WB if compared with experimental values, especially at ultimate deformation. Thus, plastic hinge length may be even greater for DB in comparison to WB. Therefore, some feasible corrections of the formulations for chord rotations are proposed, in order to reduce the bias and thus increase the robustness of the model for cross-section shape variability.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10699942
  • Publié(e) le:
    10.12.2022
  • Modifié(e) le:
    10.05.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine