0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Shear Enhancement of RC Beams Using Low-Cost Natural Fiber Rope Reinforced Polymer Composites

Auteur(s):
ORCID
ORCID

Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 5, v. 12
Page(s): 602
DOI: 10.3390/buildings12050602
Abstrait:

The aim of this research work is to investigate the efficiency of newly developed Natural Fiber Rope Reinforced Polymer (NFRRP) composites to enhance the shear strength of reinforced concrete (RC) beams. Two types of NFRRP composites were made using low-cost hemp and cotton fiber ropes. The effectiveness of this NFRRP confinement in increasing the shear, energy dissipation, and deformation capacities of concrete beams was studied. The effect of these natural fiber ropes with different configurations on beams was investigated. The responses of seven RC beams with different spacing arrangements of natural fiber ropes were evaluated in terms of shear enhancement, deflection, energy dissipation capacity, effect of strengthening configuration, rope types, and ultimate failure modes. The NFRRP composites exceptionally enhanced the load carrying abilities, energy dissipation, and deformation capabilities of RC beams as compared to the control beam. The ultimate load carrying capacities of natural hemp and cotton Fiber Rope Reinforced Polymer (FRRP) composite confined beams were found to be 63% and 56% higher than that of the control beam, respectively. Thus, the shear strengthening of RC beams using natural fiber ropes is found to be an effective technique. Finite Element Analysis was also carried out by using the Advanced Tool for Engineering Nonlinear Analysis (ATENA) software. The analysis results compare favorably with the tests’ results.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10679490
  • Publié(e) le:
    18.06.2022
  • Modifié(e) le:
    10.11.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine